At present, some mobile phones are temporarily unable to use 3D try-on due to changes in recent android. We apologize for any inconvenience caused We will solve this issue as soon as possible.
The site will be shut down from 9:55 ~ 10:10 (UTC+8) for maintenance. We will restart the site right after we finish the update. We apologize for any inconvenience caused. Thank you for your support.
Wearing a good pair of eyeglasses is as making-up. They not only protect your eyes and correct the refractive errors but also balance your face shape to make it look thinner and longer. They are able to enhance the beautiful parts of your face. An elegant and high-quality frame can give you different looks and make you more fashionable.
You might need to pay attention to certain aspects before choosing the suitable frame.
The tip is to find the complementary balance of your face shape and the frame of eyeglasses. For example, if you have a soft-line face shape, you might need to find the glasses that have sharp angles or that are with a bright color. As mentioned below, we have analyses and suggestions regarding different sorts of face shape.
It is important to choose a frame that suits your purpose of use. Therefore, finding a frame that meets your needs is the most important. For example, if a person having severe myopia needs lightweight and ultra-thin glasses for usually wearing, then the rim shall be smaller and it is important to position eyes in the middle of lenses. This is the best combination for the lightweight and ultra-thin glasses, but it might still have an impact on other choosing options. If a consumer has a low nasal bridge, then it is important to see if the frame is with the nose pads to prevent the eyeglasses from slipping or wearing glasses lower than the normal position.
Basically, the face shapes of human being are complicated and various. We only provide a basic group of different face shapes. The consumers still need to rethink before buying. For example, a round face shape has almost the same length and width, and the lines of forehead and the lines between cheek and jaw don't have evident angles. Therefore, the glasses with sharp angles can make the face look thinner and longer. Obvious nose pads of frame can also lengthen the distance of two eyes, which also makes the face thinner and longer.
Full frame, Semi-Rimless, Rimless
It is better to choose the suitable material of frame according to your needs. Please note that the same material can be divided into many quality levels and prices in accordance with the materials' proportion and processing procedures:
Follow the handy guide below to measure your glasses and make shopping easy!
Once you find your frame measurements, you can browse our selection, find the style you want, and order the perfect pair of glasses.
Just like clothes, eyewear has sizes, too! It is simple to order a perfectly fitting pair of eyeglasses at FitGasses.com. All you need to do is know what size of your frame is? XS/S/M/L/XL?
First, as you can see in the following picture, please put your old and perfectly fitting eyeglasses upside down, and measure the frame total width (measure the inner part of temples at the middle point). For example, the size is 130mm=13cm. So, your frame total width(E) is 130mm, which is your key size of your frame. As you keep it in mind, it is really easy to find and shop your suitable eyeglasses at FitGlasses.com.
(Note: In general, the temple of frame should be parallel and perfectly fitting.If the temple of frame are obviously expanding outward, you might adjust frame total width(E) by the fact how loose or tight you wear the glasses.
Secondly, you can go to FitGlasses.com product page and find the frame total width check box at the bottom of the fine search. Check what your size is and then the website will show those frames that suit your size perfectly.
● S, 130mm <= x <= 134mm
● M, 135mm <= x <= 139mm
● L, 140mm <= x <= 144mm
● XL, x >= 145mm
Usually, the frame total width can have a tolerance of 3mm difference, which means you can choose the frame width from 127mm to 133mm if your size is 130mm. You can check the frame detailed size at product page.
Of course, the more closer the size is, the more fit you will feel.
The fourth, besides the total frame width, there are more frame dimensions
that you can compare to your old and fitting eyeglasses.
By doing so, you will be able to image the glasses you shop online.
In general, you can find lens width, bridge width and temple(arms)
length at your inner part of temple arm. As you can see in the following pictures,
55 (mm) means lens width (A)
18 (mm) means bridge width (C)
140(mm) means temple (arms) length (D)
If any questions, please feel free to contact us firstname.lastname@example.org
If the rim of frame with prescriptions of bifocal Lenses (presbyopia)/ progressive lenses (presbyopia) is not high enough, the visual range will be decreased and the blind zone will be thus be increased. That is, these two prescriptions will need a frame with a certain height of rim to accompany with. Generally, it is better to be longer than 27 mm. But it needs to be adjusted according to the prescription, types of lens, the pupillary distance and the adaptability of the glasses-wearers.
Thank you for using 2D try-on service. To ensure your privacy, uploaded photos can not be accessed by others.
If you haven’t signed in the system, you won’t be able to see uploaded photos on other computers. The photos will be automatically deleted within 24 hours. If you signed in to the system, your photos will be saved in your profile. You could delete the photos by clicking the [Delete Photo] link in the Photo Gallery.